Safety belt operators should wear labor protection products in accordance with the provisions, check before operation, and correctly use anti-fall supplies and climbing appliances and equipment during operation. When working at the height of seat belt, there should be guardians to monitor the workers at the height, and the guardians should stick to their posts.

Precautions before climbing: Safety belt used in high work, various parts should not be arbitrarily removed, not to use damaged. The safety belt should be fastened on the hook without sharp or sharp edges and corners above the vertical position. It should not be hung low or used high. No rope should be used instead, and the bolt must meet the requirements. The safety helmet must be worn steadily and the jaw strap must be fastened properly. All kinds of ladders used in climbing operations should be firm and placed smoothly. The slope of the ladder is generally 60 to 70 degrees, and should be equipped with anti-slip devices. There is no tower hook on the top of the ladder. If the foot of the ladder is not stable, someone should monitor the ladder. The pull rope of the step ladder must be firm. Metal ladders should not be used near electrical equipment. Ladders should be checked once a year.

Previous:Technical requirements for Marine safety nets

Next:How to maintain the Marine cage